Restomod Racing

Â

I’ve been in the process of rebuilding a friend’s 71 Mustang that has a 351C in it.  The Mustang has a Novi 1200 supercharger kit installed with a carb enclosure.  A local shop told my friend that the Paxton kit was designed for his car.  As it would turn out, this was not the case.  The shop would not take back the kit claiming that he had it too long.  My friend went to another local shop to have it installed.  Since it was not designed for the 351C, my friend paid some serious money for the install.

Here’s the sad part.  One shop sells him something that won’t fit his car and the other shop did a poor job of fabrication.  Where the belt wraps around the SC pulley, I squeezed the the upper and lower SC belt together to test the tension and noticed that the head unit would move. I told my friend that his belt must have been slipping.  He said “that explains why I would get the belt slipping squeal when I nailed it.”  I checked the fuel pump and realized the shop did not boost reference it as per the install instructions.  Good thing there was no boost!  It really shows that a lot of shops do not take pride in their work nor do they conduct business with integrity.  Both shops are very well known here in the SF Valley.

First of all I would like to thank you for visiting my blog site. As you can tell, I am interested in cars. My primary interest is my 65 Mustang 2+2. My son’s have a Acura CL, TT RX-7 and a Turbo Supra. As you can see, I’m not the only performance nut in this house.

A little background on my car. As I mentioned above, it is a 65 Mustang 2+2. It is powered by a Novi 2000 supercharged and stroked 351W (408W). I have a Lentech AOD Street Terminator trans attached to a custom 3″ driveshaft. The Versaille 9″ rear has 35 spline axles and a set of 3.70:1 gears. I have not been able to establish the rwhp with the supercharger, but the engine made 454 rwhp in naturally aspirated form.

At this time I am working on a friends 71 Mustang. We are in the process of giving it a little more punch. I will talk about it in another blog.

Thanks again for dropping by.